background image

3

atlona.com

Toll free: 1-877-536-3976

Local: 1-408-962-0515

Introduction

The Atlona AT-UHD-CLSO-612ED is an advanced six-input, multi-format switcher with 4K scaling, 
Ethernet-enabled HDBaseT™, and PoE capabilities. It simplifies classroom and small office system 
integration by providing two HDBaseT inputs, two HDMI inputs, two multi-function analog inputs, 
plus mirrored HDBaseT and HDMI outputs. Advanced Automatic System Control (AASC) features 
on the switcher provide automatic display control and automatic input selection. An internal 
Ethernet hub in on the switcher enables control signal pass-through and network distribution. The 
AT-UHD-CLSO-612ED contains a full RS-232 signal distribution system to route control signals to 
local sources and displays. Professional audio features such as a microphone input with 48-volt 
phantom power and ducking eliminates additional voice-lift audio needs. The switcher is configured 
and managed by Atlona Management System software to reduce installation time and enable 
remote support. The AT-UHD-CLSO-612ED addresses a wide array of AV switching and processing 
needs often encountered in classrooms, conference rooms, boardrooms, training rooms and other 
presentation settings.

Package Contents

Features

• 1 x AT-UHD-CLSO-612ED
• 11 x Female captive screw connector 

            6 pin: audio, 5 pin: IR, 3 pin: RS-232, 3 pin: MIC/Line

• 1 x 48V/3.125A DC power supply adaptor
• 1 x Pair of dual purpose wall/rack mounts
• 1 x IR remote control
• 1 x User manual

• Accepts HDMI and HDBaseT inputs from up to 328 feet away
• Multifunctional VGA ports for RGBHV, component, S-Video, and composite signals 
• Microphone 

(dynamic, phantom, and line)

 input with ducking

• HDBaseT output mirrored to HDMI output
• Automatic display control
• Auto switching - automated switching to last connected source without using a control system
• Balanced audio inputs for embedding audio
• Balanced 

(+4 dbu)

 analog audio output for de-embedding audio to amplifiers or audio systems

• Upscaling and downscaling to ensure compatibility with any display or source up to 4K resolution
• Control via RS-232, IR, TCP/IP, WebGUI, and multi-language On-Screen Display
• Master and sub volume control
• Adjust treble and bass on audio output to ensure the best speaker performance
• PoE to HDBaseT inputs and outputs 

(no power required with compatible devices)

• HDCP Compliant with management for non-compliant HDCP sinks
• Supports 3D pass-through

Summary of Contents for AT-UHD-CLSO-612ED






































Reviews: