background image

   

SPECIFICATIONS

Operating Temperature Range

-5 to +35°C (-41 to +95 °F)

Operating Humidity Range

5 to 90 % RH (no condensation)

Input Video Signal

0.5-1.0 volts p-p

Input DDC Signal

5 volts p-p (TTL)

Format Supported

DTV/HDTV:1080P/1080i/720P/576P/480P/576i/480i

PC: VGA, SVGA, XGA, SXGA, UXGA, WXGA,  

       WSXGA, WUXGA

Audio Format Supported

DTS-HD, Dolby tureHD, 7.1ch and others

HDMI Standard

HDMI 1.3 (compatible with previous versions)

Maximum Transmission Distance <50ft on the direct HDMI output
UTP cable Transmission Distance <130ft with Twister Pair Receivers, if longer distance is 

required, we offer optional UTP Repeaters

IR wave-length & frequency

Wave-length: 940nm IR  frequency: 38KHZ

Power Consumption

35wtts (Max)

Dimensions (Inch)

17.3L×7.9W×1.7H

Weight (Main Unit)

7.6 LB

 

Note: Specifications are subject to change without notice.

Master Unit
1. 1 x AT-PROHD88M-SR
2. 8 x IR emitter cables (marked IR TX),
3. 1x IR receiver cables (marked IR RX)
4. 1 x USB to RS232 cable
5. 1 x 12VDC Universal Power Supply. (UL Listed)
6. 1 x Rack Mounting ears.
7. 1 x IR Remote.
Slave Unit
1. 8 x Receiver Units AT-PROHD88M-R
2. 8 x IR receiver cables (marked IR RX), 
3. 8X 5VDC power supply, 
4. 8x Rack Mounting ears.

1. 1 x Operating Instructions.

2. 1 x CD with RS232 commands and control software.

2                                                   

  

PACKAGE CONTENTS

Summary of Contents for AT-PROHD88M-R



























Reviews: