20
Check the working status.
Press “ENTER” button for 4 seconds, then the LED will show the working status one by one. For Example: switch
mode---Debug mode---IR status---DIP setting status. Then push the ‘ENTER’ button or wait for 3 seconds, PRO
-
HD88M-SR goes back to normal working condition.
Switch mode
: FAST SW fast swich mode/ NORM SW norm switch mode.
Debug mode
: DBG OFF debug mode off / DBG ON debug mode on.
IR status
: IR ON (the function of IR call back from remote locations to control the HDMI Matrix PROHD88M-SR is
on/ IR OFF the function of IR call back from remote locations to control the HDMI Matrix PROHD88M-SR is off).
DIP setting status
: FIX (fixed EDID)/ FULL CPY (full copy EDID) /LIM CPY (limited TMDS clock copy EDID); H12
2CH (HDMI 1.2 stereo)/ H12 6CH (HDMI 1.2 6channel)/ H13 2CH(HDMI 1.3 stereo) / H13 6CH(HDMI 1.3 6chan-
nel)
Failed, LED shows MIX FL
Attention:
1. When the DIP switch is set to fixed EDID (1000---1111), the EDID COPY operation will fail. The LED will show
MIX FD.
2. Please insert or extract cables gently.
Clean switcher with a soft, dry cloth. Never use alcohol, paint thinner or other chemicals to clean this unit.
Damage requiring service: The unit should be serviced by qualified Atlona service personnel if:
1. The DC power supply cord or AC adaptor has been damaged;
2. Liquids have been spilled into the switcher or HDMI receiver modules;
3. The unit does not operate normally (exceeds standard temperatures)
4. The unit has been dropped and the case has been damaged.
MAINTENANCE
PRODUCT SERVICE
