Atlona AT-HDVS-210U-TX-WP Manual Download

Page: 21 / 88

AT-HDVS-210U-TX-WP

Info page

Model Name

The model SKU of this product.

Software Version

The version of firmware that the AT-HDVS-210U-TX-WP is running. Always make sure to check the AT-HDVS-210U-

TX-WP product page, on the Atlona web site, for the latest version of firmware.

On-Time (h-m)

The time elapsed since the unit was last powered-on. Turning the unit “off”, using the PWOFF command, will not

reset this field.

Active Input

The currently selected input. Refer to the

A/V Settings page (page 22)

for information on changing the input.

Signal Type

Displays the input resolution of the source device.

Video Format

Displays the video format.

Aspect

Displays the aspect ratio of the input video source.

Color Space

Displays the color space of the input video source.

Color Depth

Displays the color depth of the input video source.

The Web GUI

Summary of Contents for AT-HDVS-210U-TX-WP

























































































Search results

Summary of Contents for AT-HDVS-210U-TX-WP

Reviews:

Related manuals for AT-HDVS-210U-TX-WP

Brands by name

Popular brands

Atlona AT-HDVS-210U-TX-WP, Manual

Search results

Summary of Contents for AT-HDVS-210U-TX-WP

Reviews:

Related manuals for AT-HDVS-210U-TX-WP

Brands by name

Popular brands