AT-HDVS-200-RX
21
Menu System
Setting
Description
Source
The current input source that is displayed. The source will be displayed
as HDMI or VGA.
Name
The name of the source, if available.
Product
The product name, if available.
Sink
Contains the manufacturer’s abbreviation of the sink.
Model
Displays the model of the display.
Native1
The native (preferred) timing for the display.
Native2
Displays any detailed (alternate) timing information for the display.
MCU TX / RX
Indicates the firmware version of both the transmitter (TX) and receiver
(RX). If the TX is not connected, then “Unknown” will be listed next to
the TX field.
HDBT
Displays the version of HDBaseT on the transmitter and the receiver.
HV Total
The total number of horizonal and vertical pixels.
HV Display
The display resolution.
HV Polarity
Polarity of both the horizontal and vertical sync pulse.
Scan Mode
The scan mode - either progressive or interlaced.
Type
The type of video signal.
HDCP
Indicates whether or not if HDCP content is present.
Clock
Indicates whether the source status of
the TMDS clock is detected (On)
or has been lost (Off).
Sync
Indicates whether the source status of the
TMDS sync is detected (On) or
has been lost (Off).
Identity
Displays the detected resolution of the source.
Type (Audio)
Displays the audio format.
SR (Audio)
Displays the sampling rate of the audio signal.
FIFO (Audio)
Displays the status of the FIFO audio buffer.
TX
The IP address of the transmitter.
RX
The IP address of the receiver.
