AT-HDVS-200-RX
40
Commands
HDBTRS232
Sets the baud rate, data bits, parity bit, and stop bits for the
HDBaseT IN
port. Each argument must be separated
by a comma; no spaces are permitted. Brackets must be used when typing this command. Use the
sta
argument,
without brackets and including a space
, to display the current settings.
Syntax
HDBTRS232[W,X,Y,Z]
Example
HDBTRS232[115200,8,0,1]
Feedback
HDBTRS232[115200,8,0,1]
Parameter
Description
Range
W
Baud rate
2400, 4800, 9600, 19200, 38400, 57600, 115200
X
Data bits
7, 8
Y
Parity bit
None, Odd, Even
Z
Stop bits
1, 2
HDCPSet
Set the HDCP reporting mode of the
HDMI IN
port on the transmitter. Some computers will send HDCP content if
an HDCP-compliant display is detected. Setting this value to
off
, will report to the source device that the AT-HDVS-
200-RX is not an HDCP-compliant device. This allows the source to transmit non-HDCP content to the sink. Setting
this value to
off
will
not
decrypt HDCP content. on = enables HDCP detection; off = disables HDCP detection; sta =
displays the current HDCPSet setting.
Syntax
HDCPSet X
Parameter
Description
Range
X
Value
on, off, sta
Example
HDCPSet on
Feedback
HDCPSet on
