Atlona AT-HDVS-200-RX Manual Download

Page: 17 / 62

AT-HDVS-200-RX

Menu System

6. When overscan is

enabled

, the

H Size %

and

V Size %

fields can be adjusted. Press the

UP/DN

buttons to

highlight the desired field.

Press the

MENU

button to select the field.

8. Press the

UP/DN

buttons to change the value. Press the

button to

increase

the value; press the

button

decrease

the value.

Press the

MENU

button to confirm the change.

10. Highlight the

Menu Back

option, then press the

MENU

button to return to the

Main Menu

The Audio menu allows adjustment of all audio settings.

1. Under the

Main Menu

, highlight the

Audio

menu item using the

UP/DN

buttons on the front panel.

Press the

MENU

button.

3. The

Audio

menu will be displayed.

Audio

HDMI Audio

Enable

L/R Audio

Enable

Mute

Off

Volume

0dB

Treble

Bass

Menu Back

Audio

Setting

Description

HDMI Audio

Controls the HDMI audio, only. Set to

Disable

to mute the HDMI audio.

L/R

Audio

Toggles the analog audio output

Enable

Disable

. Set to

Disable

mute the analog audio output.

Mute

Provides muting of both HDMI and analog audio outputs. Set this value

Disable

to mute all audio.

Volume

Controls the output volume. This value can be set from

-80 dB

0dB

Treble

Set the amount of treble applied to the output. Both HDMI and analog

audio are affected. This value can be set from

-12

+15

Treble

Set the amount of bass applied to the output. Both HDMI and analog

audio are affected. This value can be set from

-12

+15

Press the

UP/DN

buttons to highlight the desired option.

Press the

MENU

button to confirm the selection. The current value will be highlighted in green and surrounded

by brackets and two arrowheads.

Press the

UP/DN

buttons to select the desired value. Press the

button to increase the value; press

decrease the value.

8. Press the

MENU

button to confirm the value.

9. Highlight the

Menu Back

option, then press the

MENU

button to return to the

Main Menu

Summary of Contents for AT-HDVS-200-RX































































Search results

Summary of Contents for AT-HDVS-200-RX

Reviews:

Related manuals for AT-HDVS-200-RX

Brands by name

Popular brands

Atlona AT-HDVS-200-RX, Manual

Search results

Summary of Contents for AT-HDVS-200-RX

Reviews:

Related manuals for AT-HDVS-200-RX

Brands by name

Popular brands