AT-HDR-M2C
21
Command
Description
AudioOut1
Enables / disables PCM audio on the HDMI output
BASS1
Adjusts the bass on the audio output
Broadcast
Enables / disables broadcast mode
HDCPSet1
Sets the HDCP mode on the HDMI input
HDMIAud
Enables / disables audio on the HDMI output
IPAddUser
Adds a user to TCP/IP control
IPCFG
Displays the IP settings of the AT-HDR-M2C
IPDelUser
Deletes the specified user from TCP/IP control
IPDHCP
Enables / disables DHCP mode
IPLogin
Enables / disables IP login
IPPort
Sets the TCP/IP port number
IPQuit
Ends the TCP/IP session
IPStatic
Sets the static IP address of the AT-HDR-M2C
IPTimeout
Sets the TCP/IP timeout interval before the connection is terminated
Mreset
Resets the AT-HDR-M2C to factory-default settings
PrefTimg
Sets the preferred timing on the output
RAtlMac
Displays the MAC address of the AT-HDR-M2C
TREBLE1
Adjusts the treble on the audio output
Type
Displays the model information of the AT-HDR-M2C
UARTPara
Assigns the RS-232 settings for the serial port
Version
Displays the firmware version of the AT-HDR-M2C
VOUT1
Adjusts the volume of the audio output
VOUTMute1
Mutes / un-mutes the audio on the analog AUDIO OUT and HDMI - PCM 2 ports
Commands
IMPORTANT:
Each command is terminated with a carriage-return (0x0d )and the feedback is
terminated with a carriage-return and line-feed (0x0a).
The following tables provide an alphabetical list of commands available on the AT-HDR-M2C. All commands
are case-sensitive and must be entered as documented. If the command fails or is entered incorrectly, then the
feedback is “Command FAILED”.
