AT-HDR-H2H-44MA
9
AT-HDR-H2H-44MA
POWER
FNC
ENTER
CANCEL
2
4
INFO
1
3
EDID
FW
DC 24V
4
3
2
1
RS-232 IR IN
S
RX TX
HDMI OUT
4
3
2
1
R
L
R
L
R
L
R
L
LAN
AUDIO OUT
HDMI OUT
HDMI IN
4
3
2
1
AT-HDR-H2H-44MA
Panel Description
1 Function Buttons
Power
- Sets the unit in and out of standby.
Enter
- Used for making selection within the front
panel OSD.
FNC
- Use to switch number buttons to their
secondary function.
CANCEL
- Navigates back one step in the front panel
OSD.
2 Number Buttons
Use for selection of inputs and outputs.
1
- Press FNC + 1 to route selected input to all
outputs.
2
- Press FNC + 2 to turn the IR receiver window on
and off.
3
- Press FNC + 3 to open the EDID menu.
4
- Press FNC + 4 to display the device firmware.
Press 4 again to view IP, IP port, and MAC.
3
HDMI IN
Connect HDMI cables to these ports from HDMI
sources.
4 HDMI OUT
Connect an HDMI cable from this port to an HDMI
display, extender, or switcher.
5
AUDIO OUT
This port provides source audio 2CH de-embedding.
The audio of the HDMI inputs will be directly de-
embedded to an audio DSP, amplifier, or player
device.
6 LAN
Connect an Ethernet cable from this port to a Local
Area Network (LAN). This port provides access to the
webGUI or TCP/IP control.
7
FW
Connect a mini USB cable to this port to update the
firmware.
8 Control Port
Connect a third party controller or PC to control the
matrix through either IR or RS-232.
9 DC 24V
Connect the included 24V DC power supply to this
power receptacle.
3
5
4
6
7
8
9
1
2
