33
FRONT VIEW – TRANSMITTING UNIT
P
ANEL
D
ESCRIPTIONS
REAR VIEW – TRANSMITTING UNIT
HDMI-IN:
Connect a HDMI
TM
source with a HDMI
TM
M-M cable here
Mode:
0: HDMI
TM
mode with 8 audio channels
1: HDMI
TM
mode with S/PDIF 2 audio channels
2: DVI mode
3-5: Reserved
6: Use default EDID
*
7: Learn EDID from the receiver
+5V DC:
Connect to 5V DC power supply
RJ45-OUT:
Plug in a CAT5/5e/6 cable that needs to be linked to the RJ-45
connector of the receiving unit.
HDMI-IN
Mode
RJ45-OUT
+5V DC
Note for EDID (Extended Display Identification Data) learning
1. Don’t plug in HDMI
TM
cable to HDMI
TM
input connector while processing writing
default EDID or writing display’s EDID.
2. The LED next to the rotary controller turns off when the writing process is completed.
3. Please connect the display which you want to read EDID to
HDMI-IN
and turn
Mode
to
7
so the TX can learn the EDID information from the connected HDTV. The LED
on the RJ-45 of TX will dim and light again in a few seconds, which indicates the
EDID learning is finished.
4. Turn
Mode
clockwise from
Mode 7
to
Mode 0
or
Mode 1
and enjoy the experience.
DO NOT let the rotary arrow pass by mode 6 which will erase the EDID just learned
and set back to default EDID.
