background image

7

Avoid excessive humidity, sudden 
temperature changes or temperature 
extremes. 

Safeguards

 

To reduce the risk of electric shock, do not
expose this product to rain or moisture. 

Keep this product away from wet locations
such as bathtubs, sinks, laundries, wet 
basements and swimming pools. 

If the wall plug does not fit into your local 
power socket, hire an electrician to replace
your obsolete socket. 

Use only accessories recommended by
ATLONA to avoid fire, shock or other 
hazards. 

Do not modify the wall plug. 
Doing so will void the warranty and safety 
features. 

Unplug the product before cleaning. Use a 
damp cloth for cleaning. Do not use 
cleaning fluid or aerosols, which could 
enter the unit and cause damage, fire or 
electrical shock. Some substances may 
also mar the finish of the product. 

This equipment should be installed near 
the socket outlet and the device should 
be easily accessible in case it requires 
disconnection. 

Precautions

 

Never open or remove unit panels or make

any adjustments not described in this 

manual. Attempting to do so could expose 

you to dangerous electrical shock or other 

hazards. It may also cause damage to your

AT-HDMI40SRS. Opening the product will 

void the warranty. 

FCC Regulations state that any 
unauthorized changes or modifications to 
this equipment not expressly approved by
the manufacturer could void the user’s 
authority to operate this equipment. 

Do not attempt to service the unit. Instead

disconnect it and contact your Authorized 

ATLONA reseller or contact ATLONA 

directly. 

Operate this product using only the 
included external power supply. Use of 
other power supplies could impair 
performance, damage the product or cause
fires. 

In the event of an electrostatic discharge, 
this device may automatically turn off. If this
occurs, unplug the device, and plug it back 
in. 

Protect and route power cords so they will 
not be stepped on or pinched by anything 
placed on or against them. Be especially 
careful of plug-ins, or cord exit points from 
this product. 

SAFETY INFORMATION 

Summary of Contents for AT-HDMI40SRS











Reviews: