7
www.atlona.com
Toll free: 1-877-536-3976
Local: 1-408-962-0515
2. RS232
The Atlona switcher is featured with RS232 control port which allows users to control the switch though a control system
or from the computer.
The serial communication parameters are 9600 baud rate, 8 bit, No Parity and 1 stop bit
When the unit recognizes a complete command it will perform the requested action - there is no delimiter character
required.
Note: The unit does not send out a feedback message when a value is changed from the front panel or by IR control. If
the switcher needs to be controlled though front panel in addition to the RS232 control, user should regularly verify the
unit’s status to ensure the control system accurately reflects the current settings.
3. RS-232 Commands
Baud Rate : 9600 bps
Data Bit :8 bits
Parity : None
Stop Bit :1 bit
• Each command is terminated with a Carriage Return
• Each feedback is terminated with a Carriage Return
• Code entry is CASE SENSITIVE.
• Do not insert spaces between letter/number code entries.
Command
Description
Feedback
PWON
Power ON
PWON
PWOFF
Power OFF
PWOFF
All#
Reset all input signals to matching output.
(Input 1 to Output 1, Input 2 to Output 2,etc…)
All#
x1AVx1
Switch specified input to the output. If input is 5,
then command would be x5AVx1
x1AVx1
Status
Display input currently routed to the output
x3AVx1
Mreset
Reset device to manufacture default
Mreset
Note1:
Feedback for for a command repeats the original command. Example, if x1AVx1 is a command, the feedback
is the same and if the command is x2AVx1, the feedback would also be x2AVx1
Note2:
If command fails, the feedback should be “Command FAILED”
