50 PennEngineering • www.pemnet.com
Instruction Manual - RIV939P
7 - SERVICING THE TOOL
7.1 - MAINTENANCE STATUS
Maintenance operations must be carried out with the tool stopped and disconnected from the pneumatic supply line.
Warnings:
• The tool maintenance instructions must be carefully followed.
• To ensure safety and perfect tool efficiency, we recommend using ORIGINAL spare parts.
7.2 - CLEANING
Completely clean and grease the tool on a periodic basis (depending on the type and frequency of use). At minimum, carry out
cleaning operations at least once a year.
7.3 - ORDINARY MAINTENANCE
See Figure 6.2-A.
To prevent stoppages and faults of the tool, regular maintenance (including inspections, checks and operations) must be scheduled
to keep the following under systematic control:
• State of lubrication of the tool.
• State of wear of consumables.
P 3
Shut off all sources of power to the tool.
The operator must wear and use suitable personal protections before starting to clean the tool.
