PennEngineering • www.pemnet.com
47
Instruction Manual - RIV912
CAUSE
Motor screwing
Quick kit assembly
SOLUTION
When the rotating pin (26 part number 4175500) is broken and you
replace it, the motor may rotate continuously, which means that the
shaft (12 part number 3542200) is too long; in this case it will have
to be shortened by a few tenths to obtain the closure of the ball (20
part number 3096900).
Unlike the situation above, the shaft is too short and it has to be
replaced with a new one, fitting it without end float, with the air on,
in order to obtain the closure of the ball (20 part number 3096900).
When assembling the quick kit (code 4176900), with air off, make
sure to create an axial space of 1.5mm allowing the pin to move
freely.
