Operation Instructions
39
PV-10PX / PV-10HPX
Operation Instructions
Please read the safety tips carefully before operating the lift.
To lift vehicle:
1. Keep the lift area free of clutter;
2. Position lift arms to the lowest position;
3. Open lift arms;
4. Position vehicle between columns;
5. Move arms to the vehicles lifting points;
NOTE: The four lift arms must make contact at the same time with the
vehicle’s lifting points and both axles must rise off the ground at the
same time.
6. Pres the “UP” button until the lift pads contact the underside of the vehicle.
Check to make sure the vehicle is secure;
7. Continue to raise the lift slowly to the desired working height, ensuring the
balance of the vehicle;
8. Push lowering handle to lower lift onto the nearest lock. The vehicle is ready
to repair.
NOTE: The lift must always be on the safety locks.
To lower vehicle:
1. Keep the lift area free of clutter;
2. Press the “UP” button to raise the vehicle slightly, and then release the safety
device. Lower the vehicle by pushing the lowering handle;
3. Put the arms on the same side by opening the rear arms, then closing the
front arms along with the rear arms;
4. Drive the vehicle away from the lift.
