2
1
Warning:
TO REDUCE THE RISKS OF FIRE, ELECTRIC SHOCK OR INJURY TO
PERSONS, OBSERVE THE FOLLOWING
2 High voltage and moving parts around motors and motor driven equipment can cause serious
or fatal injuries. Always disconnect power source at main switch before wiring, servicing or
cleaning unit. Do not rely on fan control device to prevent unexpected start-up or electrical
shock. In addition, power supply must have fuses or circuit breakers for short circuit
protection.
3 All electrical wiring must be performed by qualified persons in accordance and conform withal
applicable national and local electrical codes.
4 Fan should be secure in its electrical grounding to avoid possible electrical shock.
5 Fan should not be used in any wet or hazardous location In addition, its ambient temperature
should not exceed 40 degrees Celsius.
6 Power supply should conform to voltage rating of 220-240V~, 50/60Hz.
7 Before applying power, visually re-inspect the installation. Make sure that all guards and
protective devices are securely in place and all visible screws and bolts are tightened. All
set-screws must be retightened before installation.
8
Warning:
to reduce the risk of fire, electrical shock or personal injury, mount hanging bracket
to outlet box marked "Acceptable for fan support and a hanging weight of 45 Lbs (20.4 Kgs)."
Do not mount fan to sheet rock or drywall type materials and use only the screws provided
with the outlet box.
9 This appliance is not intended for use by persons (including children) with reduced physical,
sensory or mental capabilities, or lack of experience and knowledge, unless they have been
give supervision or instruction conceming use of the appliance by a person responsible for
their safety.
10 Children should be supervised to ensure that they do not play with the appliance.
A. Use this unit only in the manner intended by the manufacturer. If you have any questions,
contact the manufacturer.
B. Before servicing or cleaning unit, switch power off at service panel and lock the service
disconnecting means to prevent power from being switched on accidentally. When the
service disconnecting means cannot be locked, securely fasten a prominent warning
device, such as a tag, to the service panel.
C. Installation work and electrical wiring must be done by qualified persons in accordance
with all applicable codes and standards including fire-related construction.
D. When cutting or drilling into wall or ceiling, do not damage electrical wiring and other
hidden utilities.
READ AND SAVE THESE SAFETY AND INSTALLATION
INSTRUCTIONS.
Consult a licensed electrician if unsure of any point below mentioned.
DANGER/WARNING/CAUTION
