Owner’s Manual
F6-AMIX
Multi-Function Analog Mixer Card
AtlasSound.com
– 6 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
Panel Features
1.
Channel Input Level
- Recessed rotary controls adjust the signal levels of the 6 inputs of the F6
Main Frame and will combine / mix with RCA and Mic/Line inputs if required. These Channel
Input Level controls are
PRE
the F6 Main Frame Front Panel Master Level controls. Rotate
Clockwise to increase the level, counterclockwise to decrease.
Note:
These individual Channel
Input Level controls must be ON for signal to be sent to the Front Panel Level controls.
2.
RCA Input Left/Right
- Connect unbalanced line level signals to these inputs. Stereo sources
are
electronically summed.
3.
RCA Level Control
- Recessed rotary control adjusts the level of the RCA Input signal. Rotate
clockwise to increase the level, counterclockwise to decrease the level.
4.
Mic/Line Input
- Balanced Line or Mic level signals are connected to this input. Your source
connections must be mated properly to this connector or signal loss and/or noise may be
introduced. For Gain or Source type selection, refer to the Block Diagram on page 10 for the proper
input function settings.
Note:
Unbalanced line level inputs can be inserted by using the following
wire configuration, connect the (G) and (-) terminals together.
5.
Mic/Line Level Control
- Recessed rotary control adjusts the level of the Mic/Line input signal.
Rotate clockwise to increase the signal, counterclockwise to decrease the level.
6.
VOX Mute Sensitivity
- Recessed rotary control adjusts the sensitivity of the VOX (Voice
Activated) Mute circuit. The channel you want muted must be selected using the Channel Mute
Receive Dip Switch. Rotate clockwise to increase the sensitivity, counterclockwise to decrease. It
is recommended to try several tests with audio present at the Mic/Line input terminals to
determine the best setting for muting. Too sensitive and false muting may occur, not enough and
muting may not occur dependably.
7.
Remote Mute
- Shorting these terminals with a switch will activate the internal mute circuit.
Any
10
2
3
5
6
1
4
8
9
7
11
