Atlas Copco XAHS 186 Cud PNE, Instruction Manual

Page: 42 / 70

- 42 -
5. Fill the air receiver until the pointer of
the oil level gauge is in the upper part of
the green area. Be sure that no dirt gets
into the system. Reinstall and tighten
the filler plug.
6. Start the compressor and let it run
unloaded for a few minutes.
7. Stop the compressor, wait a few minutes
and top up with oil until the pointer of
the oil level gauge is in the upper part of
the green area.
COOLANT SPECIFICATIONS
.
Never add more oil. Overfilling
results in oil consumption.
Never remove the cooling system
filler cap while coolant is hot.
The system may be under
pressure. Remove the cap slowly
and only when coolant is at
ambient temperature. A sudden
release of pressure from a
heated cooling system can result
in personal injury from the
splash of hot coolant.
It is strongly recommended to
consult the engine's operation
manual.
Never mix different coolants and
mix the coolant components
outside the cooling system.