Atlas Copco XAHS 186 Cud PNE, Instruction Manual

Page: 35 / 70

- 35 -
Maintenance
LIABILITY
The manufacturer does not accept any
liability for any damage arising from the
use of non-original parts and for
modifications, additions or conversions
made without the manufacturer’s approval
in writing.
SERVICE PAKS
A Service Pak is a collection of parts to be
used for a specific maintenance task, e.g.
after 750, after 1500 and after 2250
running hours.
It guarantees that all necessary parts are
replaced at the same time keeping down
time to a minimum.
The order number of the Service Paks are
listed in the Atlas Copco Parts List (ASL).
Use of service paks
Service Paks include all genuine parts
needed for normal maintenance of both
compressor and engine.
Service Paks minimize downtime and keep
your maintenance budget low.
Order Service Paks at your local Atlas
Copco dealer.
SERVICE KITS
A service kit is a collection of parts to fit a
specific repair or rebuilding task.
It guarantees that all necessary parts are
replaced at the same time which improves
the uptime of the unit.
The order numbers of the Service Kits are
listed in the Atlas Copco Parts List (ASL).
STORAGE
Run the compressor regularly, e.g. twice a
week, until warm.
Load and unload the compressor a few
times to operate the unloading and
regulating components. Close the air outlet
valves after stopping.
SAFETY PRECAUTIONS
Contact Atlas Copco.
If the compressor is going to be
stored without running from
time to time, protective
measures must be taken.
Always observe the applicable
safety precautions. See section
Safety during maintenance and
repair.