Atlas Copco SK 160 SA 1, Instruction Manual

Page: 42 / 94

- 42 -
3. Install the new lamp and replace the safety spring
(2).
4. Lock the protective glass using the 5 clamps and
remember to carefully tighten the screws with a
screwdriver.
5.5.6 Ordering spare parts
It is possible to order spare parts for the lighting tower
by making reference to the parts as mentioned in the
enclosed Parts List manual.
Always quote the part number, the designation and
the quantity of the parts required, as well as the type
and the serial number of the machine.
5.6 Resetting service alarms
1. On the controller display, press the Alarm button
(1) and the Enter button (2) simultaneously for at
least 15 sec., until the following message appears:
2. By pressing the Enter button (2) the expired
maintenance operations are listed.
3. Press the Alarm button (1) for at least 3 seconds to
cancel the maintenance operation. The following
message will appear:
4. When all maintenance operations have been
cancelled, the maintenance LED (3) will go out.
A spare lamp for emergency
situations can be kept in the tool
space (4) on the side of the lighting
tower opposite to the electric panel.
4
Example:
Example:
3
2 1
MAIN. N.1 EXPIRED
CANCEL ?
MAINTENANCE N.1
CANCELLED