Atlas Copco PNS 1250 Cud S3A/T3 APP, Instruction Manual

Page: 30 / 114

- 31 -
4 Installation
4.1 Transporting and lifting
4.1.1 Transporting
Road transport is only allowed on a trailer, with
sufficient capacity.
Before towing the unit on the trailer, block the towbar
by locking the blocking device (1) in downward
position. The blocking device has to be pulled up first,
before it can be turned over.
– Leave the towbar in blocked position on the trailer
and secure the unit (see section 4.2).
– Lock blockage device in upward position when
unit is manoeuvred to its working location.
– Lock all service doors.
4.1.2 Lifting
To lift the unit, use a lift truck or crane with sufficient
capacity.
Use the lifting positions of the unit as shown in the
figure below.
See to it that the unit will be lifted vertically and
remains level.
The operator is expected to apply all
relevant safety precautions,
including those mentioned on
pages 7-10 of this book.
Release brake before towing.
!
!
1
Lifting acceleration and deceleration
must be kept within safe limits (max.
4g).
Helicopter lifting is not allowed.
!