© 2015 Construction tools PC AB | No. 9800 1713 0
1
| 2015-04-07
13
Original instructions
AME 1600
Safety and operating instructions
1. Remove the protective cap (C) to reach the
carbon brushes (B). Use a large
fl
at bladed
screwdriver to remove the cap.
Replacing the
fi
lter
1. Remove the screws (A)
2. Pull out the rear cover (B)
A
B
3. Replace the
fi
lter
4. Re
fi
t the rear cover (A)
Wiring diagram
A. Main
B. Switch
C. Rotor
D. Brush
E. Stator
NOTICE
The rotation is anti-clockwise (coupling
side view)
AT vibrator tube
Due to workload, ambient temperature and
vibrations caused by the vibrator poker’s contact
with the concrete and/or rebar. This will cause
wear on the bearings and sealing and these will
eventually fail. When components have failed they
must be replaced with original parts. Replacement
bearing kits are available, see Spare part list.
1. Dismantle the end cap (right hand thread) and
the tube connector (left hand thread).
