►
No person who is under the influence of drugs,
alcohol or medication may operate the
machine.
Installation, precautions
WARNING
Ejected working tool
If the tool retainer on the machine is not in a locked
position, the working tool can be ejected with force,
which can cause personal injury.
►
Always stop the machine before changing the
working tool or accessories.
►
Never point the working tool at yourself or
anyone else.
►
Make sure that the working tool is fully inserted
and the tool retainer is in a locked position
before the machine is started.
►
Check the lock function by pulling the working
tool outwards powerfully.
WARNING
Moving or slipping working tool
An incorrect dimension of the working tool’s shank
can result in that the tool is lost or is slipping out
during operation. Risk of severe injury or crushed
hands and fingers.
►
Check that the working tool has the shank
length and dimensions that the machine is
intended for.
►
Never use a working tool without a collar.
Operation, precautions
WARNING
Overheating hazard
The machine may overheat if the cooling air inlet is
covered. This can cause serious damage to the
machine and/or the operator.
►
Never block or cover the cooling air inlet.
DANGER
Explosion hazard
If a warm working tool or exhaust pipe comes into
contact with explosives, an explosion could occur.
During operating with certain materials, sparks and
ignition can occur. Explosions will lead to severe
injuries or death.
►
Never operate the machine in any explosive
environment.
►
Never use the machine near flammable
materials, fumes or dust.
►
Make sure that there are no undetected
sources of gas or explosives.
►
Avoid contact with the warm exhaust pipe or the
bottom of the machine.
►
Never drill in an old hole.
DANGER
Fuel hazard
The fuel is extremely flammable and petrol fumes
can explode when ignited, causing serious injury or
death.
►
Protect your skin from contact with the fuel. If
fuel has penetrated the skin, consult a qualified
health professional.
►
Never remove the filler cap, and never fill the
fuel tank when the machine is hot.
►
Mix the fuel and fill the fuel tank outdoors or in a
clean and well ventilated place, free from
sparks and open flames. Fill the fuel tank at
least ten meters (30 feet) from the place where
the machine is to be used.
►
Release the filler cap slowly to let pressure
escape.
►
Never overfill the fuel tank.
►
Make sure the filler cap is screwed on when the
machine is used.
►
Avoid spilling fuel on the machine, wipe off any
spilled fuel.
►
Check regularly for fuel leaks. Never use the
machine if it is leaking fuel.
►
Never use the machine in the proximity of
material that can generate sparks. Remove all
hot or spark-generating devices before starting
the machine.
►
Never smoke when filling the fuel tank or when
working with the machine or servicing it.
►
Only store fuel in a container that is specially
constructed and approved for the purpose.
►
Consumed petrol and oil containers must be
taken care of and returned to the retailer.
►
Never use your fingers to check for fluid leaks.
WARNING
Unexpected movements
The inserted tool is exposed to heavy strains when
the machine is used. The inserted tool may break
due to fatigue after a certain amount of use. If the
inserted tool breaks or gets stuck, there may be
sudden and unexpected movement that can cause
injuries. Furthermore, losing your balance or
slipping may cause injury.
►
Make sure that you always keep a stable
position with your feet as far apart as your
shoulder width, and keeping a balanced body
weight.
Safety and operating instructions
COBRA COMBI
6
© Atlas Copco Airpower | 9800 0955 01 | 2018-01-01
Original instructions
