Atlantis +Power 302 AV Kit, Multilanguage Manual

Page: 33 / 56

33
 The PowerLine HD Ethernet Adapter should be operated from the type of power
indicated on the marking label. If you are not sure of the type of power available,
consult your dealer or local power company.
 The PowerLine HD Ethernet Adapter relies on the building’s electrical installation
for short-circuit (over current) protection. Ensure that a fuse or circuit breaker no
larger than 230 VAC is used on the phase conductors (all current-carrying
conductors).
 Plug the PowerLine HD Ethernet Adapter directly into a 96-230V AC wall outlet.
Do not use an extension cord between the adapter and the AC power source.
 Do not attempt to service the PowerLine HD Ethernet Adapter yourself, as
opening or removing covers may expose you to dangerous voltage points or
other risks as well as ruin product warranty. Refer all servicing to qualified service
personnel.
 Unplug the PowerLine HD Ethernet Adapter from the wall outlet and refer the
product to qualified service personnel for the following conditions:
 If liquid has been spilled into the product.
 If the product has been exposed to rain or water
 If the product does not operate normally whenthe operating instructions are
followed
 If the product exhibits a distinct change in performance
Product warranty does not apply to damage caused lightning, power
surges or wrong voltage usage.
Check voltage before connecting to the power supply. Connecting to
the wrong voltage will damage the equipment.
High voltage is used in the equipment. Do not open enclosure,
service, or change any part of the equipment. Service can only be
carried out by qualified technical specialists. Observe safety
precautions to avoid electric shock.