Atlantis NetFly AP4 WN Manual Download Page 70

Page: 70 / 90

3.2

Network



Click on the

Network

link on the navigation drop-down menu. You will

then see three options: Status, LAN, and WAN. Each option is described
in detail below.

3.2.1

Status



Click on the

Status

link on the

Network

navigation drop-down menu.

This page will display the current LAN settings such as IP address,
subnet mask, and MAC address.

3.2.2

LAN / DHCP Client, Server



Click on the

LAN

link on the

Network

navigation drop-down menu.

This page will allow you to configure the device as a static or dynamic IP

address, along with DHCP server settings.



Bridge Type

: Select

Static IP

Dynamic IP

from the drop-down

list. If you select Static IP, you will be required to specify an IP address

Summary of Contents for NetFly AP4 WN



























































































Search results

Summary of Contents for NetFly AP4 WN

Reviews:

Related manuals for NetFly AP4 WN

Brands by name

Popular brands

Atlantis NetFly AP4 WN, Manual

Search results

Summary of Contents for NetFly AP4 WN

Reviews:

Related manuals for NetFly AP4 WN

Brands by name

Popular brands