Atlantis NetFly AP4 WN Manual Download Page 43

Page: 43 / 90

3.1.4.2.7

VLAN



Click on the

VLAN

link under the

Wireless

drop-down menu. A VLAN

(Virtual LAN) is a group of hosts with a common set of requirements
that communicate as if they were attached to the same wire, regardless

of their physical location.



Virtual LAN

: Choose to Enable or Disable the VLAN features.



SSID1 Tag

: Specify the VLAN tag.



Click on the

Apply

button to save the changes.

3.1.4.2.8

WMM (Wireless Multimedia)



Click on the

WMM

link under the

Wireless

drop-down menu. WMM is

Quality of Service (QoS) for wireless and ensures that voice and video

applications get priority in order to run smoothly.



Specify the priority and then click on the

Apply

button.

Summary of Contents for NetFly AP4 WN



























































































Search results

Summary of Contents for NetFly AP4 WN

Reviews:

Related manuals for NetFly AP4 WN

Brands by name

Popular brands

Atlantis NetFly AP4 WN, Manual

Search results

Summary of Contents for NetFly AP4 WN

Reviews:

Related manuals for NetFly AP4 WN

Brands by name

Popular brands