ENG
19
The function P2P allows the remote-viewing avoiding to set up other devices. You can view or control the
device (live) by simply adding the unique code in the app or scanning the QRcode of the product.
NetCamera supports
ONVIF 2.2/RTSP
in order to provide a larger choice of devices (NVR, CMS Sw or NAS).
With the included Channel Surveillance Software software (Windows), up to 16 devices (NVR or IP Camera,
up to 64 channels) can be managed for monitoring and recording (motion detection).
NetCamera has an integrated 802.3af Power over Ethernet (PoE) support, allowing installation of this device
in areas where power outlets are not readily available.
Use of audio or video equipment for recording the image or voice of aperson without
their knowledge and consent is prohibited in certain states orjurisdictions. Nothing herein
represents a warranty or representation that the Atlantis product provided herein is
suitable for the end-
user’s intended use under the applicable laws of
his or her state.
Atlantis disclaims any liability whats oever for any end-user use of the Atlantis product,
which fails to comply with applicable state, local, or federal laws.
Please verify, in order to avoid compatibility problem with IP Cameras (A11-510B-DP,
A11-820A-BPV, A11-910A-BPVM, A11-820A-DP), that the PoE Switch or Injector support
802.3af Mode A or Mode B.
1.1 SYSTEM REQUIREMENTS
Before installing Router, your PC should meet the following (only for WEB configuration or Live View with a
Browser):
TCP/IP protocol must be installed on each PC
FireFox, Chrome, Safari, IE or Opera
Pentium 4 1800MHz (or equivalent AMD) with 4GB Ram
Graphic Card: 64 MB RAM graphic cards(or equivalent on-board graphic cards)
Windows 7, 8, 10
1.2 PACKAGE CONTENTS
Unpack the package and check all the items carefully. Also, keep the box and packing materials in case you
need to ship the unit in the future. The package should contain the following items:
IP Camera with Wall Mount kit
Quick Start Guide (English, Italian)
Cd-Rom with manual, Utility and CMS Software
Warranty Card
If any item contained is damaged or missing, please contact your local dealer as soon as possible.
1.3 CABLING
Ensure the camera is fixed (using the 4 screws) securely otherwise it may fall and cause injury.
Now You can change the camera Pan/Tilt in order to satisfy your installation. Use the wrench to release the
screw, the adjust and move it up/down.
Align the mounting rings so that the arched area is above the IR LED light (dome). Make sure the ring does
not cover any part of the IR LED light (right image) because it will reflect the light back into the camera
during nighttime.
In the end connect the DC Adapter (isn’t included) or power distribution
box to the Camera (using a Power
Connector Adapter) or connect directly the device to PoE Switch/Injector/A11-NVRXXXX (only if camera is
PoE).
Summary of Contents for NetCamera 510A-D
Page 1: ......
Page 27: ...APPENDIX 27 ...