Micro Star™ LED Light Bar Installation Instructions
The Micro Star LED Light Bar is an easy to install lighting
solution for your railing system. They come in three (3)
lengths and four (4) popular finish options to compliment your
railing system. Being completely water resistant and encased
in an aluminum channel and plastic lens cover, these lights
are able to stand up to the most demanding environments.
The Micro Star LED Light Bar is both a functional and creative
lighting alternative.
The following guide will take you step-by-step through the
process of installing the Micro Star LED Light Bar.
©2019 All Rights Reserved ▪ Atlantis Rail Systems, Micro Star and RailEasy is a
registered trademark and trademark of Suncor Stainless, Inc. ▪ www.atlantisrail.com
1
April 2019
ATLANTIS RAIL
Contact Information:
Atlantis Rail Systems
70 Armstrong Road
3900 Civic Center Drive
Plymouth, MA 02360
North Las Vegas, NV 89030
(800) 541-6829 or
(508) 732-9191
(508) 732-9798
www.atlantisrail.com
Warning
Note
Tips for a Successful Installation
● Read the instructions completely before beginning the
installation.
● Check carton(s) to determine part count is complete.
Table of Contents
Tools 1
Tips for a Successful Installation
1
Micro Star LED Light Bar Components
2
Additional Components
2
Micro Star Transformer Calculator
2
Installing the Micro Star LED Light Bar
3
Additional Components
4
Micro Star LED Light Bar Specifications
5
Micro Star LED Light Bar Product Specifications
5
Tools
ALWAYS USE WORK GLOVES AND WEAR SAFETY
GLASSES TO PROTECT YOUR HANDS AND EYES.
Required & Recommended
Carpenter’s Square
Pencil
Work Gloves
Safety Glasses
Power Drill
1/16” & 13/32”
Drill Bit
Tape Measure
Phillips Head
Screwdriver
