12
Connect your 2.5” SATA hard drive to the SATA connector on the circuit
Board.
Place the hard drive back to the aluminum housing
1.
Slide the hard drive carefully into the bottom of aluminum
housing.
2.
The hard drive should be placed in accordance with the
picture below.
3.
Close the cover by applying the previously removed screws.
4.
Please handle with much care. Make sure that the SATA hard
drive does not become detached in the process.
Summary of Contents for DISKMASTER HDE 103
