Atlantis A02-RA340, User Manual, Page: 75 / 85

WebShare 340/440
69
If you have multiple public/WAN IP addresses from you ISP, you are eligible for One-to-One
NAT to utilize these IP addresses.
NAT Type: Select desired NAT type. As set in default setting, it disables the One-to-One
NAT function.
Global IP Address:
Subnet:
The subnet of the public/WAN IP address given by your ISP. If your ISP has
provided this information, you may insert it here. Otherwise, use IP Range method.
IP Range: The IP address range of your public/WAN IP addresses. For example, IP:
192.168.1.1, end IP: 192.168.1.10
Select the
Apply button to apply your changes.
Check to
Add Entry create a new One-to-One NAT rule:
Time Schedule:
A self-defined time period to enable your virtual server. You may specify a
time schedule or Always on for the usage of this Virtual Server Entry. For setup and detail,
refer to
Time Schedule section
Application : Users-defined description to identify this entry or click to select existing
predefined rules. Click the Radio button to select the rule; Application, Protocol and
External/Redirect Ports will be filled after the selection.
Protocol : It is the supported protocol for the virtual server. In addition to specifying the port
number to be used, you will also need to specify the protocol used. The protocol used is
determined by the particular application. Most applications will use TCP or UDP;
Global IP: Define a public/ WAN IP address for this Application to use. This Global IP
address must be defined in the Global IP Address.
External Port: The Port number on the Remote/WAN side used when accessing the virtual
server.
Redirect Port: The Port number used by the Local server in the LAN network.