Atlantis A02-RA340, User Manual, Page: 17 / 85

WebShare 340/440
11
Chapter 3
Configuration
The ADSL2+ VPN Router can be configured with your Web browser. The web browser is
included as a standard application in the following operation systems, UNIX, Linux, Mac OS,
Windows 95/98/NT/2000/Me, and etc. The product provides a very easy and user-friendly
interface for configuration.
3.1 Before Configuration
This section describes the configuration required by LAN-attached PCs that communicate
with the ADSL2+ VPN Router, either to configure the device or for network access. These
PCs must have an Ethernet interface installed properly, be connected to the ADSL2+ VPN
Router either directly or through an external repeater hub, and have TCP/IP installed and
configured to obtain an IP address through a DHCP server or a fixed IP address that must be
in the same subnet of the ADSL2+ VPN Router.
The default IP address of the ADSL2+ VPN Router is 192.168.1.254 and subnet mask is
255.255.255.0. The best and easy way is to configure the PC to get an IP address from the
ADSL2+ VPN Router.
Also make sure you have UNINSTALLED any kind of software firewall that can cause
problems while accessing the 192.168.1.254 IP address of the router.
Please follow the steps below for PC’s network environment installation. First of all, please
check your PC’s network components. The TCP/IP protocol stack and Ethernet network
adapter must be installed. If not, please refer to MS Windows related manuals.
Any TCP/IP capable workstation can be used to communicate with or
through the ADSL2+ VPN Router. To configure other types of
workstations, please consult the manufacturer’s documentation.
3.2 Connecting the ADSL2+ VPN Router
•
Connect the ADSL2+ VPN Router to a LAN (Local Area Network) and the
ADSL/telephone network.
•
Power on the device
•
Make sure the PWR is lit steady & LAN/ADSL LED is lit.
•
Before taking the next step, make sure you have uninstalled any software firewall.