Atlantis Land A02-UO1-W54, Manual

Page: 51 / 118

ENGLISH
52
If you want to use WMM – Power Save or Direct Link , you must enable WMM. The
setting method of enabling WMM indicates as follows:
•
Click WMM Enable , then click Apply . Change to Site Survey Page . And
add a AP that supports WMM features to a Profile.
•
Click WMM – Power Save Enable . And Click Setting… button. After
clicking Setting… button, show Power Save Setting dialog. Please select
which ACs you want to enable. Then click Apply button. The setting of
enabling WMM – Power Save is successfully.
•
Direct Link Setup Function will be released with the new driver.
3.2.7 About
The About section shows the Driver Version, Firmware Version, MAC Address, IP
Configuration and the Utility version.