21
20
The calibration value is between -3°C and
+3°C.
For example: the temperature displayed on
your radiator is 20°C.
The temperature displayed on your
thermometer is 18°C => select the
calibration value -2°C.
Window
detection
If paired, allows the open window detection
function to be deactivated on this appliance
only. Deactivating the function on this
appliance does not deactivate the function on
the other paired appliances and allows it to
follow the open window detection function
of the other paired appliances.
Deletion
Reserved for radio controlled appliances.
Allows the setpoint temperature to be
reduced from -1°C to -2°C during peak rate
periods. You are notified of these periods
through the transmission of a private radio
message, depending on the system that is
installed.
Luminosity of
the ring
Allows the luminosity level of the ring (on
indicator) to be adjusted.
Restrictions
Max.
temperature
Allows a maximum setpoint temperature to
be recorded that must not be exceeded. It is
set to 28°C by default and can be changed
(from 19°C to 28°C).
Access
control
Allows the appliance's settings to be partially
or fully locked.
PIN code
Allows a personal access code to be
recorded in the Expert Menu. Once
activated, access to the Expert Menu is
encoded.
Your personal code can be noted here.
To deactivate the code, return to the Expert
Menu, enter your personal code, and return
to Configurations => Restrictions => PIN
Code.
Connectivities Send security
key
The security key secures your iO installation
to prevent interference with nearby
equipment.
Key exchange provides the possibility of
connecting an iO control point to your
installation.
Allows the security key to be sent to an iO
control point.
Use this operation if the appliances are
paired.
Receive
security key
Allows the security key to be received from
an iO control point.
