35
It is possible de return to the standard settings for your device.
This device is filled with a precise amount of coolant. This fluid does not deteriorate and requires no particular maintenance. Any re-
pairs requiring the coolant reservoir to be opened, must only be performed by a professional, the manufacturer or its After-Sales ser-
vice. The latter must be contacted in the event of a leak.
When the device is scrapped, the coolant must be disposed of only at an authorised waste coolant collection depot.
Hold the following keys down si-
multaneously
- Aeration (
B
),
- Settings (
C
),
- Scroll (
E
),
until everything is displayed on
the screen (
see page 25 for the
different displays
).
The device switches to Comfort
mode at
19°C. The
mode is at 15.5°C. The energy
saving and programmed functions are deacti-
vated.
E
B
C
Calibrate the temperature
Returning to the standard factory settings
Specific gravity of the coolant
contained in the device
Maintenance
To maintain your device’s performance, you must dust it approximately twice a year.
Never use abrasive products or solvents.
Hold the following keys down si-
multaneously:
- Programming (
C
),
- Power on (
E
).
With the + (
D
) or - (
F
) keys, choose your
calibration value (
between -2°C and 2°C
).
E.g.The temperature displayed on your device is
20°C.
The temperature displayed on your thermome-
ter is 19°C -> Choose a calibration value of -1°C.
Confirm your choice by pressing the Programming
key (
C
). Your device will heat until the room tem-
perature reaches 20°C.
E
C
D
F
Depending on your installation, the temperature you read may be different to the one displayed on your device. In that
case, you can calibrate the temperature displayed.
GB
