EN
24
Hot water
outlet
Cold
water inlet
Siphon
Dielect.
connect.
Temp.
limiter
L1
Earth
L2
L3
Cold water
Hot water
È
È
Electrical distribution
board
16 A circuit breaker,
day/night switch
and 30 mA differential
Tap in a bathroom
for example
CAUTION
If your pipes are not made from
copper (PER, multi-layer, etc.),
it is MANDATORY to fit a copper
pipe with a minimum length
of 50 cm (DTU.60.1) and/or
a temperature limiter at your tank’s
hot water tank. (see p. 28)
INSTALLATION PRECAUTIONS :
• Temperature at the installation point
should be between 4°C and 35°C
• Position the water heater as close as
possible to the water supply rooms
• If the water heater is installed
above a living area,
install a water retention tank
Installation Manual : Overall assembly diagram
