EN
44
Specifi c case:
Fitting a vertical wall-mounted water heater
on a tripod
The use of a compliant and compatible tripod is mandatory
when fi tting a water tank with a capacity greater than 100 L on
a non load-bearing wall (cannot support the weight of the full
tank).
First fi t the water heater on its tripod in order to mark
the mounting points.
Carry out the drilling.
Put the water heater back in place.
Fitting a vertical wall-mounted water heater Blinded 50L Slim
Fasten the wall plate to the wall
using M8 studs (pre-fi xed on the wall)
and M8 nuts
4.2. Vertical water heater on base
Fitting a vertical water heater on a base (fi g.
u
)
does not require mounting.
Make sure you fi t it on a fl at surface.
You can use a riser (fi g.
v
)
to facilitate routing of the pipes.
4.3.
Horizontal wall-mounted water heater - Underside connection
A horizontal water heater can be fi tted to the wall, ceiling or fl oor.
Leave a free space of 400 mm underneath the cover in case the heater element in case the heater ele-
ment needs to be replaced.
Installation Manual: Fitting the water heater
The cold water inlet and the hot water outlet must always be at the bottom.
È
È
È
È
È
È
AR
R-M
UR
BA
CK-
WA
LL
ARR-
MU
R
BA
CK
-W
ALL
AR
R-M
UR
BA
CK
-W
AL
L
AR
R-M
UR
BA
CK
-W
ALL
Must mount the upper bracket.
v
u
Summary of Contents for 021116
Page 8: ...FR 6 ...
Page 38: ......
