Atlantic Technology 3.1 HSB Instruction Manual Download Page 3

Instruction Manual

3

Important Safety Information

This product was designed and manufactured to 
meet strict quality and safety standards. There are, 
however, some installation and operation precau-
tions which you should be particularly aware of.

1. 

Read Instructions. All the safety and operating 
instructions should be read before the system 
is operated.

2. 

Retain Instructions. The safety and operating 
instructions should be retained for future 
reference.

3. 

Heed Warnings. All warnings on the appli-
ances and in the operating instructions should 
be adhered to.

4. 

Cleaning. Unplug the appliance from wall 
outlet before cleaning. Do not use liquid 
cleaners or aerosol cleaners. Use a damp 
cloth for cleaning.

5. 

Attachments. Do not use attachments not 
recommended by the product manufacturer 
as they may cause hazards.

6. 

Water and Moisture. Do not use this appli-
ance near water: for example, near a bath 
tub, washbowl, kitchen sink, or laundry tub, 
in a wet basement, or near a swimming pool, 
and the like.

7. 

Accessories. Do not place this appliance on an 
unstable stand, bracket, or table. The product 
may fall, causing serious injury to a child or 
adult, and serious damage to the product. 

8. 

Power Sources. This product should be 
operated only from the type of power source 
indicated on the marking labels. If you are not 
sure of the type of power supply to your home, 
consult your dealer or local power company.

9. 

Grounding or Polarization. This product may 
be equipped with polarized alternating-current 
line plugs (plugs having one blade wider than 
the other). This plug will fi t into the power 
outlet only one way. This is a safety feature. 
If you are unable to insert the plug fully into 
the outlet, try reversing the plug. If the plug 
should still fail to fi t, contact your electrician 
to replace your obsolete outlet. Do not defeat 
the safety purpose of the polarized plug.

10.  Power Cord Protection. Power-supply cord 

should be routed so that it is not likely to be 
walked on or pinched by items placed upon 
or against it, paying particular attention to 
cords at plugs, convenience receptacles, and 
the point where they exit from the appliances.

11.  Lightning. Unplug the product from the 

wall outlet for added protection during a 
lightning storm, or when it is left unattended 
and unused for long periods of time. This 
will prevent damage to the product due to 
lightning and power-line surges.

12.  Overloading. Do not overload wall outlets and 

extension cords as this can result in a risk of 
fi re or electric shock.

13.  Object and Liquid Entry. Never push objects of 

any kind into this product through openings, 
as they may touch dangerous voltage points 
or short out parts that could result in a fi re or 
electric shock. Never spill liquid of any kind 
on this product.

14. Servicing. Do not attempt to service this 

product yourself, as opening or removing 
covers may expose you to dangerous volt-
age or other hazards. Refer all servicing to 
qualifi ed service personnel.

15.  Damage Requiring Service. Unplug this 

product from wall outlets and refer servic-
ing to qualifi ed service personnel under the 
following conditions:

  a.  When the power supply cord or plug is 

damaged.

  b.  If liquid has been spilled, or objects have 

fallen into the product.

  c.  If the product has been exposed to rain 

or water.

  d.  If the product does not operate normally 

by following the operating instructions. Ad-
just only those controls that are covered by 
the operating instructions, as an improper 
adjustment of other controls may result in 
damage and will often require extensive 
work by a qualifi ed technician to restore 
the product to its normal operation.

  e.  If the product has been dropped or the 

Summary of Contents for 3.1 HSB













Reviews: