Atlanta 1337DL, Technical Manual & Parts Lists, Page: 25 / 62

Technical Manual & Parts Lists
20
 Close Feeder Rollers at Operator Panel
 Using Skirt Feed Button feeder some material into the work area to ensure proper feeding
without binding.
 THREADING SEWING HEAD - Threading, Setup, Maintenance and Operation of the
PEGASUS Sewing Head is beyond the scope of this Publication. Please refer to the
PEGASUS Sewing Head Manuals for a detailed instruction
Basic Operation
Alignment/Adjustment

SHARPENING CUTTER WHEEL -

DO NOT OPERATE THE MACHINE WITH THE SAFETY COVERS REMOVED
o
Close Feeder Rollers at
Operator Panel. Cutter Blade
Sharpening – WARNING - The
cutter is already sharp. Care
must be taken when the Safety
cover is removed.
o
Remove 4 screws keeping
safety cover in place. Remove
Cover exposing the Cutter
Blade.
o
In manual mode switch Main
Controller digit switch #6 to
“1”. The Cutter Motor will spin
up to speed.
o
Using a Sharpening Stone work
on cutter edges to improve
keenness of edge.
o
When satisfied with results.
Return Main Controller digit
switch #6 to “0”. The motor
with spin down and come to a
stop.
o
Replace Cover and 4 screws.
CAUTION: The rotating cutter
blade is very dangerous.