Atlanta Attachment Company 4300BC Technical Manual & Parts Lists Download Page 25

Page: 25 / 163

Technical Manual & Parts Lists

2.2.- Touch-Screen

It is important that the machine operator read this manual and is familiar with all the functions

and safety concerns of the unit before operating.

2.2.1.- General Operation

ATTENTION: DO NOT USE ANY SHARP OBJECTS TO TOUCH THE SCREEN

The graphics images presented on the touch screen show "3-dimensional" buttons,

which may be pressed to access other screens, change counters and timers, or actuate

hardware. Areas lacking the "3- dimensional" border contain information only.

Counters are identified with the "+" and "-" buttons in the corners. These counters

may be adjusted by touching the "+" and "-" boxes.

RESET

: Clears all machine functions and returns to the main page.

time and date.

LANGUAGE

: Return to the language screen. You can select multiple languages to use.

HOME

: Return to the main screen

ARROWS

: Pressing the arrows right or left will take you to the next or previous pages.

NOTES:

When a button has a white background the function is on or enabled. A

dark background indicates off or disabled. Some buttons may toggle on or off,

others must be held on.

Other screens display whenever there is a machine error or other condition that prohibits the operation of

the machine. Simply follow the instruction on the screens to resolve the problem.

There are also “ADVANCED” settings and functions available. These functions are only accessible by a

password, and include: timers that control machine hardware, input and output test screens, and machine

statistics. To get to the advanced functions the appropriate password must be entered at the security

screen. Security access is reset whenever the main power is turned off, or the RESET button on the main

page is pressed. The factory default access code is "33333".

Summary of Contents for 4300BC




































































































































































Search results

Summary of Contents for 4300BC

Reviews:

Related manuals for 4300BC

Brands by name

Popular brands

Atlanta Attachment Company 4300BC, Technical Manual & Parts Lists

Search results

Summary of Contents for 4300BC

Reviews:

Related manuals for 4300BC

Brands by name

Popular brands