Atlanta Attachment Company 4300B, Technical Manual & Parts Lists

Page: 71 / 136

Technical Manual & Parts Lists
64
5.- Update a Machine using a New Program Module
NOTE: Very Important
Before starting the procedure below , go to Advanced Settings and write down all the settings shown
in these screens.
1. Turn off power to the machine.
2. Replace the existing Program Module with the Program Module that contains the updated
program.
3. With your finger on the screen, turn power on to the
machine. When the screen changes from dark to light,
remove your finger from the screen.
4. Carefully calibrate the screen. See screen calibration.
ATTENTION: Do not turn off the machine during this process for
any reason, as vital information will be corrupted and it will be
necessary to the call manufacturer for assistance and/or return the
touch screen and module for base programming.
5. Press the “Update Controller” button. Input mechanic security code (33333). This process takes
up to 5 minutes and asks you to press the “Continue” button once during this time.
When complete the Controller will contain the updated program.
NOTE: Continue to item 6 only if you need to reprogram original module.
6. Turn off power to the machine.
7. Replace the Program Module that you installed in step #2 with the original Program Module that
came with the machine.
8. With your finger on the screen, turn power on to the machine. When the screen changes from
dark to light, remove your finger from the screen.
9. Carefully calibrate the screen.
10. Press the “Update Program Mod” button. Input technician security code (xxxxx). This process
takes up to 5 minutes. When complete the original Program Module that came with the
machine and the Controller will contain the updated program.
Now that the process is complete, go to Advanced Settings and verify them using the settings you wrote
down at the beginning of the process. Make any necessary corrections.