Atlanta Attachment Company 4300A, Technical Manual & Parts Lists

Page: 36 / 132

Technical Manual & Parts Lists
29
2.6.- Creating a Style
On the “CREATE/EDIT STYLE”
Menu proceed as following:
1.
Select “BORDER LENGTH” and introduce the dimension “A”: from
your border. Units are displayed in tenths of inches Example 314.25
inches
2.
Select HANDLES” and introduce the amount of handles you will
require. You are able to select from 0. 4 or 8 handles. Example 4.
3.
Select HANDLE WIDTH”: Introduce the width of the handles “D”.
Units are displayed in tenths of inches Example: 1.75 inches.
4.
Select “SIDE HANDLE CENTER DISTANCE: and introduce the
dimension “B” Units are displayed in tenths of inches. Example
39.50.
5. In case of 8 handles options an additional dimension is required. Select
“ND HANDLE CENTER DISTANCE” and introduce the dimension
“C” Units are displayed in tenths of inches Example 37.25.
6.
Select “COMPENSATION SELECTION”. You will have 8 different
values that can be set according with the type of material.
7.
Select “DESCRIPTION” and type the ID number for this type of
border.
8.
Select “SAVE STYLE” to store all changes
From
the
library
of:
Diamond
Needle
Corp