Atlanta Attachment Company 1390BX, Technical Manual & Parts Lists

Page: 25 / 172

Technical Manual & Parts Lists
17
Top Film Loading
The standard 1390B machine comes with a Top Film Roll storage rack that can handle up to (4)
12” diameter x 120” long rolls of plastic film.
Important note! The film rolls must be loaded such that they unwind counter-clockwise, looking
from the left side of the machine (see “Film Routing” on page 19).
Besides the standard top film roll rack, Atlanta Attachment Company offers two options to aid in
the loading and storage of the Top Film Rolls:
1. Crane option - For installations with a limited space on each side of the machine. The crane lifting
mechanism can be swiveled 360 degrees from the shown position this allows any orientation of rolls on
the floor next to the machine.
2. Extended Top Roll Rack option - For installations where the rolls can only be loaded from the Output
End of the machine. This option allows loading of up to (18) 12” diameter rolls on top of the machine.
The Extended Roll Rack option excludes the Crane option due to space limitations on top of the
machine.
If the side space is not limited, an operator can load the Top Film using a standard fork lift.
The standard Top Film Roll Rack has (2) roll film release rods to allow the rolls to be advanced one at a
time.
Figure 9