Atlanta Attachment Company 1335MH, Technical Manual & Parts Lists

Page: 86 / 176

Manual & Parts Lists Technical
79
3.- Border Loop Eye
The border loop eye is located on the border guide
rod assembly. The border loop eye,
when covered (yellow light is on) activates the
border unwinder feed rollers.
4.- Adjustments
Hand wheel and Panel Eye
To set the eye, first remove the cover (not shown),
make sure that the operating mode switch is set to
L.O. or all the way clockwise, with the eye
“seeing”
the reflective tape, turn the
Gain/Sensitivity Screw to the “+” or clockwise
until the L.E.D starts blinking, the L.E.D should
blink about 2 times per second when set correctly.
Border Loop Eye
The border loop eye activates the unwinder motor
when the border material is lifted up towards it and
the yellow activity light comes on. To adjust the
eye you need to turn the Gain/Sensitivity screw,
turning it clockwise will increase the sensitivity of
the eye creating a larger loop, turning it counter
clockwise will decrease the sensitivity of the eye
creating a smaller loop.
Adjust the eye so that a loop of border material is
maintained while sewing the border to the panel.
From
the
library
of:
Diamond
Needle
Corp