Atlanta Attachment Company 1335MH, Technical Manual & Parts Lists

Page: 61 / 176

Technical Manual & Parts Lists
54
3.-TECHNICAL MANUAL
It is important that the machine operator read this manual and is familiar with all the functions
and safety concerns of the unit before operating.
3.1.- Individual Components
3.1.1.- Border Guide Rod Assembly
The border guide rod assembly is located right
above the sewing head. It consists of two PVC
covered rollers, the back one is installed parallel
with the floor and the front one is angled just above
the sewing head. The angled roll is set so that the
border material runs straight through the border
guide/folder while the machine is sewing.
Adjustment of the angled roll depends on the width
and type of border being sewn. Adjustment is made
with the ratchet handles.
3.1.2.-EdgeGuide/Panel Tension
Assembly
The air cylinder (4) located under the table pushes
the panel tension finger (2) up until it contacts the
bottom of the top plate (3). The amount of
pressure is determined by the middle pressure
regulator on the regulator assembly, and is set
according to the type of panel being
sewn.
3.1.3.- Ruffler Assembly
The ruffler assembly is mounted to the top of the
sewing head on a swing out bracket (14). The
ruffler drive is located under the cover (1). The
border material guide/folder (2) is mounted to the
ruffler arms by the nut plate (3).
From
the
library
of:
Diamond
Needle
Corp