Atlanta Attachment Company 1335MH, Technical Manual & Parts Lists

Page: 45 / 176

Technical Manual & Parts Lists
38
4) When the machine stops in square corner mode,
the foot and puller will rise, the Needle bar stops
down, and the panel tension finger will go down.
Operator will still be pressing down on the foot
pedal even though the machine is not sewing.
5) The operator will then have to manually turn
the panel 90 degrees until it makes contact with
the edge guide. Then will let off the foot pedal.
6) Then press back on the right side of the foot
pedal. The machine will sew two more stitches,
thumbwheel 1 on the ruffler control box. Then the
machine will make one more ruffle in the corner.
While the ruffle is being pushed under the foot and
sewn the machine is counting the number of
stitches set in thumbwheel 6, once this count has
been reached the ruffling blade will retract. Once
the ruffle/ruffles are complete on the second side
the sewing head will start sewing at maximum
speed until the next corner is “seen” by the end
sew eye, then the corner making process starts over. Continue this for all four corners.
From
the
library
of:
Diamond
Needle
Corp