Atlanta Attachment Company 1335M, Technical Manual & Parts Lists

Page: 22 / 110

Technical Manual & Parts Lists
16
General Machine Maintenance
Daily
Clean machine at the end of every shift
Clean lint etc. from the Looper/bobbin area on the sewing head
Remove any threads wrapped around moving parts of the handwheel, puller, and ruffler.
Wipe all photo eye lenses with clean, nonabrasive, dry cloth
Use blow-off hose to get rid of excess lint, thread and other clippings
Follow manufactures recommendations and guidelines for daily maintenance and
lubricating of the sewing head.
Weekly
Check all belts for tightness and condition. Adjust or replace as necessary.
Check oil level in oil pan.
Put one drop of machine oil on all moving Ruffler parts.
Electric Eye Sensor Adjustment
To adjust the sensor, first remove the clear plastic cover from the end of the
sensor. There are two adjusting screws under the cover. One is labeled “GAIN” and is
used to set the sensitivity of the sensor. The other screw is labeled “DO & LO” and should
always be fully clockwise.
With the end of the sensor pointing at the center of the reflective tape, turn the
“GAIN” screw counter-clockwise until the red LED indicator is off. Then turn the “GAIN”
screw clockwise until the LED indicator comes on. Then turn the “GAIN” screw one full
turn clockwise. The LED indicator should be blinking slowly. Cover the eye so that the
sensor cannot see the reflective tape and the LED should go off.
Reflective Tape Maintenance
Use a soft cloth for cleaning.
Do not use chemicals or abrasives to clean it.
Avoid any contact with oils and liquids.
Do not touch the tape with bare fingers.
If tape is dirty or opaque, the eye may not function correctly.
11335M Recommended Spare Parts List
Contact AAC’s sales department to order replacement parts.
Phone: 770-963-7369
Fax: 770-963-7641
Email: sales@atlatt.com
Website: www.atlatt.com
AAC Part # SP1335M Spare Parts Kit
NO. QTY PART # DESCRIPTION NO. QTY PART # DESCRIPTION
1 1 1278-7055B Prox Switch 5 1 GG100XL037 Gear Belt
2 2 1335M-2002C Ruffler Blade 6 1 GG110XL75U Gear Belt
3 2’ EEFE-RR2 Reflective Tape 7 1 GG187L050 Gear Belt
4 1 FFSM312LVQ Electric Eye 8 100 SNDBX1140 Needle