Atlanta Attachment Company 1335M, Technical Manual & Parts Lists

Page: 16 / 110

Technical Manual & Parts Lists
10
Clamp
Fig. 2
General Machine Data
Electrical & Pneumatic Specifications
Electrical: 220 VAC, 5amp, 50/60 Hz Single Phase
Pneumatic: 70-80 PSI, 2 SCFM avg.
Sewing Head: Mitsubishi LS2-2210 Lockstitch
Sewing Speed: 4000 RPM
Needle (Standard): Schmetz DBX1 Size 140
Stitch Density: 6 SPI
Sewing Head: Juki MH481U Chainstitch
Sewing Speed: 4000 RPM
Needle (Standard): Schmetz TVx7 Size 16
Stitch Density: 6 SPI
Installation & Setup
 Provide a 220VAC, single phase, 5 Amp electrical drop and 1/4" air supply line (80
PSI).
 Remove any shipping straps from machine.
 Mount and adjust the Guide Roller Assembly. (See Fig. 1)
 Check the oil level in the oil pan. To check oil, unclamp the puller motor bracket
and lean the puller motor back. (See Fig. 2) Then lean the head back to access the
oil pan. Be sure to re-clamp the puller motor bracket and insert the puller drive
shaft into the u-joint
Fig. 1