ATL Delta 700, User Manual

Page: 19 / 24

6
Front View
Conference Calling
1. To place a conference call, select a
line and dial the number. Place an
active line on hold. Select the other
line and dial the number.
2. Press the [
Conference
] button to
connect the two lines.
3. To discontinue the conference but
remain the connection to one of the
lines (eg. Line 1), press [
LINE 1
].
The phone will switch to [
LINE 1
]
and disconnect the other line.
4. To end the phone call, press the
Line key for the line you are using,
press [
Handsfree
], or return the
handset to its cradle.
Using the Handsfree or Headset
A headset can only be used in place of
the handsfree.
1. Press [
Handsfree
] to turn on the
handsfree or the headset. The
handsfree LED indicator will light.
2. To end the phone call, press
[
Handsfree
]. The handsfree LED
indicator light will turn off.
Headset Port
1. Plug a headset RJ22 plug in to the
headset port on the left side of the
base, next to the handset port.
Note: Headsets used with this
telephone must comply with the
Standard EN60950-1
Pause
You may use this feature to create a
dialing pause between digits during
a call. Typically, the Pause function is
most useful for programming dialing
delays in long number sequences of
certain speed dial numbers such as
voice mail codes and international
phone numbers. Each time you press
the [
Redial
] key, you add a 4-second
delay to the dialling sequence (you
may do this more than once to create
a longer delay). You may insert a pause
anywhere in the number.
Transfer (Recall)
The [
Transfer
] key supports customer
calling services that you have
subscribed to from your local
telephone company (such as call
waiting or three-party conference
calling).
Adjusting the Volume
Adjusting the Receiver Volume
Use the [+] and [-] buttons to adjust the
volume:
• If the phone is idle or in the handsfree
mode, press [+] and [-] to adjust the
speaker volume up and down.
• If the handset is picked up, press [+]
and [-] to adjust the handset volume
up and down.
19
ADDITIONAL FEATURES AND GLOSSARY LOCATIONS OF CONTROLS AND FEATURES
PROG