11
OVERHEAT Mode
If the shredder overheats, the LCD shows Overheat and
will flash Overheat symbol. All functions will stop. When
the shredder overheats, user may press Stop button to
place the shredder in Stand by mode. The shredder will
not resume normal functioning until the temperature of
the motor cools down to a safe temperature and LCD
shows Auto.
MAINTAINENCE
After approximately shredding of 500 sheets of paper,
the LCD will show the character Maintain and flash
maintain symbol. This indicates that the shredding
blades need to be lubricated using an approved
shredder lubricant. Only shredder lubricant sheets or
bottled lubricant designed specifically for shredders
should be used. Follow the instructions provided with
the shredder lubricant. NEVER USE AN AEROSOL
LUBRICANT, or any lubricant that is flammable. Refer to
the warnings provided in your shredder manual.
The shredder will continue to operate in a normal
manner while the Maintain icon is flashing. After
applying lubricant to the cutting blades, the Maintain
icon can be deactivated by pressing and holding the
maintain button for approximately 7 seconds. The LCD
will clear the word Maintain, and the internal counter
on the shredder will be reset to zero.
BIN FULL Mode
If the bin is full, the motor will stop and sound alert.
LCD shows the character Bin Full and flash bin full
symbol. All shredder functions will stop. If the cabinet
door is open, the LCD will show the character Door
Open and flash door open symbol. After the bin is
emptied, placed back into cabinet and the door is
closed, the LCD will show AUTO and resume normal
functioning. The machine must restart again.
