17
ATIM_ACW-TM2D-HP_UG_EN_V1.2
d.
Configuring periodic mode
Once the configuration is complete, do not leave the module connected via USB. This mode of
operation is very energy intensive. When you remove the USB connection without removing the
battery, the module re-initializes itself and automatically returns to normal operation.
e.
Factory settings
When it leaves the factory, the TM2D-HP is configured as follows:
-
Periodic mode selected by default
Parameters shared by Periodic and Energy Saver modes:
-
LoRaWAN pairing: OTAA
-
Keep-alive frame sent 1x / day
-
Temperature offset of probe 1: 0°C
-
Lower threshold of probe 1: 20°C
-
Upper threshold of probe 1: 40°C
-
Temperature offset of probe 2: 0°C
-
Lower threshold of probe 2: 20°C
-
Upper threshold of probe 2: 40°C
Parameter for periodic mode:
-
Sampling and statement period: 2 hours
Parameters for Energy Saver mode:
-
Delta of probe 1: +/- 2°C
-
Delta of probe 2: +/- 2°C
-
Sampling period in comfort zone: 2 hours (alert frame sent out if delta value is exceeded or if upper or
lower threshold is crossed)
-
Statement period when temperature is stable within comfort zone: 8 hours
-
Sampling and statement period outside comfort zone: 2 hours
Select mode of
operation
Lower threshold
Upper threshold
Offset (applied to
each reading and to
the displayed value)
Temperature sampling
+ statement period
